400–1200G Tankless RO OEM: Specify Faucet Flow Separately from Membrane Capacity

Quick answer: For a 400–1200G tankless RO OEM project, specify the water delivered at the supplied faucet separately from the membrane’s nominal daily capacity. A capacity label alone does not describe the buyer’s dispensing experience. Approve a repeatable whole-machine test before finalizing packaging.

Clarify what the capacity number describes

Ask whether “G” means US gallons per day, and whether the quoted value belongs to the membrane element or the assembled purifier. Obtain the exact membrane code and its rating conditions. Keep the pump, controller, prefilters, tubing and faucet configuration attached to the sample record so the production order has a clear reference.

DuPont’s TapTec portfolio describes different residential flow options depending on RO machine configuration, and publishes defined test conditions for element performance. This supports asking for configuration-specific evidence; it does not establish the performance of a Qiteng machine or imply that a particular membrane brand is supplied.

Use unit conversion only as a reference

For arithmetic comparison, 800 US gallons per day is approximately 3,028 litres per day, or 2.10 litres per minute if divided evenly across 24 hours. This calculation is not a measured faucet flow, a guaranteed household output or a Qiteng product specification. Ask the supplier which actual machine test supports the flow figure offered to your brand.

Write a faucet-flow acceptance sheet

Agree on the measurement method and acceptance range with the manufacturer before testing. Use qualified personnel and the model’s instructions; do not change pressure or electrical settings to chase a marketing number. Record the collected volume and elapsed time as well as the calculated litres per minute.

RecordProcurement question
Sample identityWhich model, membrane, pump and controller revision were tested?
Feed conditionsWhat water temperature, inlet pressure and feed-water description apply?
Dispensing pointWas water collected at the supplied faucet with the agreed tubing?
Test sequenceWas this the first draw, stabilized production or repeated short draws?
ResultWhat volume, time, flow and agreed acceptance range were recorded?

Review everyday use as well as one long draw

Ask for a sample-review sequence reflecting the intended household routine: a defined idle period, a first draw and several stated dispensing volumes. Keep these results separate from a continuous-production measurement. If the target market has seasonal changes in feed water, discuss the conditions the offered model is designed to handle and what supporting information is available.

Compare output alongside the relevant water-quality evidence and operating limits. A faster dispensing result should not replace review of treatment performance, maintenance requirements or the declared model configuration.

Keep the production specification consistent

Link the approved test sheet to the quotation and bill of materials. Record the supplied faucet, tube sizes, accessory pack and replacement-filter codes. Require review of substitutions that could affect the agreed result. Translate the capacity and flow descriptions together so daily membrane capacity is not accidentally presented as a tap-flow guarantee.

Buyer FAQ

Does 1200G automatically mean better performance than 800G?

It does not settle the purchase decision. Compare the offered assembled models under agreed conditions and assess the intended demand, treatment evidence, installation and service requirements.

Can a membrane data sheet replace a complete-machine test?

No. Retain the element data sheet as component documentation and request a separate acceptance record for the purifier configuration your brand will purchase.

Should the carton state GPD or litres per minute?

Use wording supported by the relevant evidence and clearly identify what each figure describes. Review destination-market requirements before approving artwork.

Discuss your private-label RO project with Qiteng

Huizhou Qiteng Environmental Protection Technology Co., Ltd. has 18 years of production and manufacturing experience and serves B2B OEM/ODM customers rather than individual retail buyers. Share your destination market, preferred 400–1200G capacity range, installation conditions, order quantity and branding brief. Ask for the selected model’s confirmed configuration and available documents before approving performance claims.

WhatsApp: +86 189 4835 3117 | WhatsApp: +86 153 4754 2518 | Contact Qiteng

Manufacturer reference

DuPont TapTec residential membrane portfolio — configuration-dependent flow options and stated element test conditions. Reviewed October 31, 2026. The procurement checklist and arithmetic example above are independently written; this reference does not certify or rate a Qiteng product.


Quick Inquiry