For overseas brands planning a stainless steel ultrafiltration (UF) water purifier, approving the appearance is only one part of sample approval. A useful OEM review also records the intended water source, installation limits, test conditions and replacement-part plan. This checklist helps turn a sample discussion into a written purchasing specification.
1. Define the application before choosing a configuration
Tell the factory whether the unit will serve one tap, a kitchen installation or a larger application. Provide available source-water information, the expected peak demand, connection requirements and installation space. Do not treat a stainless steel housing as evidence of a particular contaminant-removal capability. The CDC advises choosing a filter for the specific germs or chemicals of concern and checking the performance information for the actual product.
2. Confirm the housing and every water-contact component
Request the declared material grade and supporting records for the housing, together with specifications for seals, connectors and membrane components. Check clamp access, mounting feet and the space needed to open the end cap. Record the approved sample configuration so that later material or component changes can be reviewed before production.
3. Compare flow figures under the same conditions
A flow number is difficult to compare without the accompanying conditions. Ask the supplier to identify inlet pressure, water temperature, source-water characteristics and whether the result is for a new membrane or a defined operating period. Agree on the test method and acceptance criteria before comparing samples. Do not substitute an attractive catalogue figure for a project-specific requirement.
4. Review maintenance with the installer
Ask which cleaning or flushing procedure applies to the selected model, whether a drain connection is needed, how the membrane is replaced and which spare seals or connectors should be stocked. Avoid assuming that all UF units have the same maintenance procedure. Request instructions that match the delivered configuration.
5. Keep an OEM sample approval record
Model, sample serial number and dated photographs.
Housing and component specifications, connection sizes and installation drawing.
Agreed flow-test conditions and inspection criteria.
Any claimed performance reports or certificates, checked against the exact model and scope.
Approved logo artwork, label wording, manual and packaging.
Replacement membrane identification and spare-parts list.
Questions buyers often ask
Does stainless steel establish filtration performance?
No. Housing material and filtration performance are separate parts of the specification. Review the membrane configuration and evidence supporting each claim for the exact model.
Can one sample approval cover every OEM version?
Define which elements may change. A different membrane, seal, connector or other water-contact component should trigger a review of the relevant specifications and evidence. Branding approval alone does not establish technical equivalence.
Discuss your private-label project with Qiteng
Huizhou Qiteng Environmental focuses on B2B water purifier OEM/ODM manufacturing. For a stainless steel UF project, send your target market, water-source information, required flow, installation details, estimated order quantity and branding requirements. We can then discuss the appropriate configuration and sample-review plan. Model-specific specifications and supporting documents should be confirmed during the quotation and sample process.
Discuss your OEM requirements on WhatsApp | Alternative WhatsApp contact
Reference: CDC: About Choosing Home Water Filters. This article is a purchasing checklist, not a test report or certification statement for a Qiteng model.




