Quick answer: A ratio such as 2:1 is incomplete until the supplier defines the order of the numbers, the measurement period and the tested configuration. Put those definitions next to the figure when comparing OEM quotations.
Write the Ratio in Words
Ask whether the ratio means purified water to drain water or the reverse. Then record the measured volumes rather than just the final ratio. A simple worksheet should include purified-water volume, drain-water volume, total feed volume where measured, and the start and stop points of the test.
For an arithmetic illustration only, if a test collects 2 litres of purified water and 1 litre of drain water, the purified-to-drain ratio is 2:1. Ignoring other flows, purified water is two-thirds of the combined collected volume. This illustration is not a Qiteng product rating.
Define What the Measurement Includes
A continuous production measurement and a daily-use measurement can have different boundaries. Ask whether startup flushing, automatic flushing, standby periods and repeated short draws are included. Keep each result with its method rather than presenting unlike measurements in one comparison column.
| Comparison field | Required clarification |
|---|---|
| Ratio | Purified-to-drain or drain-to-purified |
| Operating conditions | Temperature, pressure and feed-water description |
| Timing | Startup, stable production or a stated use cycle |
| Configuration | Membrane, controller and purchased model revision |
Evaluate the Claim with the Whole Product
Do not select a product on one water-saving number alone. Request its declared output, permitted feed conditions, maintenance instructions and supporting performance information. Ask the supplier to explain the intended limits of operation. Changes to a drain component or control setting should be evaluated by the manufacturer, not used as an informal shortcut to a more attractive marketing claim.
Prepare Evidence before Printing the Box
Keep a claim-approval sheet linking the proposed wording to the tested model and test record. If the available evidence covers only a specific condition, retain that qualification in the technical material. Review translated packaging so the ratio is not accidentally reversed.
Buyer question: Can one ratio be used for every model? Use only the figure supported for the relevant configuration and stated test. Ask Qiteng for model-specific information when preparing your OEM specification.
Discuss Your OEM Project with Qiteng
Qiteng supplies water purification products for business customers, including brand owners, importers and distributors. We focus on OEM/ODM cooperation rather than individual retail orders. Send your destination market, preferred product type, estimated quantity and customization brief through our contact page. Explore our OEM/ODM services for project planning.




